Released Nutanix NCS-Core Updated Questions PDF
NCS-Core Dumps and Practice Test (195 Exam Questions)
Registration process of the Nutanix NCS-Core Certification Exam:
Step 1: Visit the Pearson VUE website and enter the required information to take your exam. You will need a Social Security or Federal ID number, a credit card, and verification of either education or work experience. Once you have entered your information, you will be able to schedule an exam appointment on the Pearson VUE website.
Step 2: You will receive an email confirmation from the Pearson VUE website with details on where to report for your exam reservation on a specified date and time. Your reservation is not confirmed until you have received this email confirmation So it is important to watch for it. Nutanix NCS-Core Dumps help you to get success in the exam.
Step 3: Please review all instructions and instructions for parking and traffic, if applicable, before arriving at the testing center. You will need check-in on-site at the Pearson VUE Testing Center 15 minutes prior to your exam appointment time. Visitor parking is available on-site and there is also street parking available.
Step 4: After you have picked up your test booklets and submitted the required paperwork, you can begin taking your Nutanix NCS-Core Exam.
Step 5: We recommend that you allow 30 minutes to complete your exam.
NEW QUESTION 114
A consultant is unable to install virtualization software on a laptop.
Which two versions of Foundation can be used to resolve this issue? (Choose two.)
- A. Foundation Portable
- B. Foundation Applet
- C. Foundation Central
- D. Foundation VM
Answer: A,B
NEW QUESTION 115
A consultant creates a four-node AHV cluster with two 1GbE (eth0, etc1) and two 10GbE (eth2, eth3) NICs per node. The 1GbE NICs will not be placed into service, but the customer wants the network to be preconfigured for their eventual use.
The consultant removes the 1GbE NIC from the default bond and creates a second bridge(br1), but is unable to add the 1GbE NIC using the below command:
manage_ovs -bridge_name br1 -interfaces 1g -bond_name br1-up update_uplinks Which parameter is missing from this command?
- A. --bond_duplex full
- B. --interfaces eth0
- C. --require_link=false
- D. --bridge_duplex full
Answer: B
NEW QUESTION 116
A consultant is planning an installation and needs to collect configuration items to be used during the install.
The data needed from the customer are IP addresses, Gateway, DNS servers, and NTP Servers.
Which Cluster Deployment document must be completed with the customer?
- A. Technical Checklist
- B. Questionnaire
- C. Project Plan
- D. Operations Guide
Answer: A
NEW QUESTION 117
An administrator needs to expand a cluster based on AHV and running on Nutanix G5 hardware with a new Nutanix G7system. The cluster is running AOS 5.10 but the operation fails when expanding the cluster. AOS is running on the new system. There are no issues discovering the node.
Why is the operation failing?
- A. EVC needs to be configured before cluster expansion
- B. G7 hardware cannot be added to a G5 cluster.
- C. AOS version running on G7 is older than the version onthe cluster.
- D. Foundation software has not been updated on the cluster.
Answer: C
Explanation:
Explanation
Ref:https://next.nutanix.com/installation-configuration-23/product-mixing-restrictions-37231
NEW QUESTION 118
Refer to the exhibit.
A system administrator is using Range-Autofill tool to assign IP addresses to setup a multi-block cluster based on the following configuration:
Which additional changes must be made during the Foundation process to configure the cluster correctly?
- A. Reorder block serial
- B. Reorder blocks
- C. Change host names
- D. Change IP address
Answer: C
NEW QUESTION 119
An administrator is deploying an application that requires maximum I/O throughput for scratch data. The administrator is concerned that the throughput requirement is greater than what can be provided by asingle cluster node.
What should the administrator do to meet this requirement?
- A. Create a volume group with one virtual disk attached to the VM
- B. Create a volume group with several virtual disks and attach to the VM
- C. Create a virtual disk attached tothe VM's PCI interface
- D. Create several virtual disks attached to the VM's virtual SCSI controller
Answer: B
Explanation:
Explanation
Ref:https://next.nutanix.com/community-blog-40/scaling-up-vm-storage-performance-on-ahv-volume-group-loa
NEW QUESTION 120
A consultant creates a Windows VM after installing a new Nutanix cluster running AHV. The consultant has statically assigned an IP address to the VM but it is unable to communicate on the network.
Which action should the consultant take to resolve this issue?
- A. Mount and install the Nutanix Guest Tools.
- B. Confirm that IPv6 is enabled on the guest VM.
- C. Confirm that the VM vNIC is tied to the correct VLAN in Prism Element.
- D. Set a Group Policy to make sure the Windows Firewall is disabled.
Answer: C
NEW QUESTION 121
After the migration, some SQL queries take longer to execute than prior to migration.
The following SQL best practices were applied while creating the SQL VM on Nutanix:
*8 vDisks per SQL server VM
*Database and Log files on separate vDisk
*2 TempDB database drives and 1 TempDB log drive
What should the administrator to do improve the SQL Server performance?
- A. Redistribute existing data by creating additional database file and enable autogrowth
- B. Create multiple SQL log files and disable autogrowth
- C. Create multiple TempDB data files and enable autogrowth
- D. Redistribute existing data by creating additional database files and disable autogrowth
Answer: A
NEW QUESTION 122
Refer to the exhibit.
An administrator has an existing cluster and needs to improve performance using AHV Turbo. Which two items are required to achieve even greater performance? (Choose two.)
- A. VMs have more than one vCPU.
- B. VMs have multi-queue disabled.
- C. VMs have one vCPU configured.
- D. Workloads are multi-threaded.
Answer: A,D
Explanation:
NEW QUESTION 123
An administrator has a 32-node hybrid cluster with CPU, RAM and storage utilization of 80%. A database VM is configured with VM Flash.
What is causing this IO latency?
- A. Curator scans causes by ILM constantly moving data.
- B. Controller VM is experiencing high CPU ready time.
- C. VM Flash Mode reduces SSD tier capacity for VMs.
- D. Database VM is experiencing high CPU ready time.
Answer: B
NEW QUESTION 124
In a Nutanix cluster, a Protection Domain contains 50 entities that are replicated to a remote Single Node Replication Target.
The current schedule configuration is as follows:
* Repeat every 6 hours
* Local Retention Policy 1
* Remote Retention Policy 8
* Starting time 12 am
At 8 am on Monday, the administrator discovers that a protected VM is corrupted. The latest good state was Sunday 2 pm. The administrator needs to maintain current protection.
Which strategy should the administrator use to meet these requirements?
- A. From the Remote site, restore the VM from the local snapshot by selecting the correct snapshot
- B. From the Remote site, activate the Protection Domain, then re-protect the entity.
- C. From the local site, retrieve the correct remote snapshot, then restore the VM locally.
- D. From the local site, restore the VM from the local snapshot by selecting the correct snapshot.
Answer: C
NEW QUESTION 125
A customer racks all nodes in the new cluster. The customer does not allow IPv6 for node discovery.
The consultant is not allowed to use the consultant's own flat switch in the customer's environment.
Which step should the consultant take to resolve this issue?
- A. Image each node individually with Foundation VM.
- B. Connect to the top of rack switch and discover the nodes with IPv4.
- C. Open a console to all nodes and statically assign IP addresses.
- D. Bare metal image all nodes with Foundation VM.
Answer: C
NEW QUESTION 126
After finishing foundation on an AHV cluster, a consultant is preparing to plug into the customer network given the following set of requirements:
* All network traffic on trunks is tagged
* Customer is using LACP
* A native VLAN is not in use
Which set of commands should the consultant use to ensure cluster connectivity on customer equipment?
- A. change_cvm_vlan 0
ovs~vsctl set port br0 tag=0
ovs~vsctl set port br0-up bond_mode=active-backup - B. change_cvm_vlan 0
ovs-vsctl set port br0 tag=0
ovs-vsctl set port br0-up bond_mode=balance-tcp - C. change_cvm_vlan 10
ovs-vsctl set port br0 tag=10
ovs-vsctl set port br0-up bond_mode=balance-tcp - D. change_cvm_vlan 10
ovs-vsctl set port br0 tag=10
ovs-vsctl set port br0-up bond_mode=balance-slb
Answer: B
NEW QUESTION 127
During the Knowledge Transfer, the customer askes where to find the details about their Nutanix environment, such as IP addresses, storage containers, and configuration.
Where can the consultant find this information?
- A. Tech Checklist
- B. Support Portal
- C. As-Built Guide
- D. Test Plan
Answer: C
NEW QUESTION 128
A customer needs to meet the following requirements for their business critical application:
* SQL Servers must be on specific hosts to lower licensing costs.
* Oracle RAC servers must be on separate hosts for licensing reasons
Which policy or policies should be implemented to meet these requirements?
- A. Configure VM-VM affinity policy.
- B. Configure VM-VM anti-affinity policy.
- C. Configure both VM-Host and VM-VM affinity policy.
- D. Configure VM-Host affinity policy.
Answer: D
NEW QUESTION 129
A consultant is performing a Nutanix Cluster installation on Dell XC Core hardware. The consultant decides to use Foundation Portable for Mac to perform the installation. When the consultant arrives onsite, Foundation Portable is unable to locate the new nodes.
Which log should the consultant check to troubleshoot this issue?
- A. foundation.app/contents/resouces/log
- B. /home/nutanix/foundation/log
- C. ~/data/logs/foundation.out
- D. ~/data/logs/foundation
Answer: B
NEW QUESTION 130
Anadministrator is notified that a bare metal database server is down. This database server is being served storage using a Nutanix Volume Group. Upon investigating, the administrator finds that the disks in the database server that map to the vDisks in thevolume group have gone offline.
What is causing this issue?
- A. A CVM serving the Volume Group has gone offline.
- B. Port 9443 is blocked in the server firewall.
- C. The Volume Group Load Balancer has been disabled.
- D. Port 3260 has been blocked in the server firewall.
Answer: A
NEW QUESTION 131
......
NCS-Core Exam Dumps Pass with Updated 2022 Certified Exam Questions: https://actual4test.torrentvce.com/NCS-Core-valid-vce-collection.html