[Nov 30, 2021] HPE6-A79 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions
Pass HPE6-A79 Exam - Real Test Engine PDF with 56 Questions
NEW QUESTION 16
A network administrator wants to permit explicit SSH, FTP and HHTP(s) access to servers in the 10.100.20.5 to 10.100.20.31 range, all devices in 10.100.21.0/24 network, and a host with IP address 10.100.22.70. The services must work properly at all times.
Which configuration scripts accomplish this task with the fewer number of lines, while avoiding access to other devices not included in these ranges? (Choose two.)
- A. Option B
- B. Option A
- C. Option D
- D. Option C
- E. Option E
Answer: A,B
NEW QUESTION 17
Refer to the exhibits.
Exhibit 1
Exhibit 2
Exhibit 3
A network administrator wants to allow contractors to access the corporate WLAN named EmployeesNet with the contractor role in VLAN 40. When users connect, they do not seem to get an IP address. After some verification checks, the network administrator confirms the DHCP server (10.254.1.21) is reachable from the Mobility Controller (MC) and obtains the outputs shown in the exhibits.
What should the network administrator do next to troubleshoot this problem?
- A. Permit UDP67 to the contractor role.
- B. Confirm there is an IP pool for VLAN 40.
- C. Configure the DHCP helper address.
- D. Remove the IP address in VLAN 40.
Answer: A
NEW QUESTION 18
Refer to the exhibits.
Exhibit 1
Exhibit 2
Exhibit 3
Exhibit 4
A captive portal-based solution is deployed in a Mobility Master (MM) - Mobility Controller (MC) network. A wireless station connects to the network and attempts the authentication process. The outputs are shown in the exhibits.
Which names correlate with the authentication and captive portal servers?
- A. ClearPass.23 is the authentication server, and cp.mycompany.com is the captive portal server.
- B. cp.mycompany.com is the authentication server, and ClearPass.23 is the captive portal server.
- C. ClearPass.23 is the authentication server, and MC2 is the captive portal server.
- D. Internal database in MC2 is the authentication server, and cp.mycompany.com is the captive portal server.
Answer: A
NEW QUESTION 19
Refer to the exhibit.
Based on the output shown in the exhibit, which wireless connection phase has just completed?
- A. MAC Authentication and 4-way handshake
- B. 802.11 enhanced open association
- C. L3 authentication and encryption
- D. L2 authentication and encryption
Answer: C
NEW QUESTION 20
Refer to the exhibit.
A 7008 Branch Office Controller (BOC) is deployed in a remote office behind a core router. This core does not support 802.1q encapsulation. The Mobility Controller (MC) is the gateway for two tunneling mode SSIDs, as shown in the exhibit.
Which two different configuration options ensure that wireless users are able to reach the branch network through the router? (Choose two.)
- A. Configure the uplink of the BOC as an access port on the controller VLAN, and enable NAT for the SSID VLANs.
- B. Configure the uplink of the BOC as a trunk port that permits the controller and the SSID VLANs. The controller VLAN must be native.
- C. Configure all ports of the BOC as access ports on the controller VLAN, and change the gateway of clients to the core router IP.
- D. Configure the uplink of the BOC as an access port on the controller VLAN, and add static routes in the router for the SSID VLAN subnets.
- E. Configure the uplink of the BOC as a trunk port, tagging the controller and the SSOD VLANs, and enable NAT for the SSID VLANs.
Answer: D,E
NEW QUESTION 21
Refer to the exhibits.


A network administrator has fully deployed a WPA3 based WLAN with 802.1X authentication. Later he defined corp-employee as the default user-role for the 802.1X authentication method in the aaa profile. When testing the setup he realizes the client gets the "guest" role.
What is the reason "corp-employee" user role was not assigned?
- A. The administrator forgot to enable PEFNG feature set on the Mobility Master.
- B. MC 1 has not received the configuration from the mobility master yet.
- C. The administrator forgot to map a dotlx profile to the corp-employee aaa profile.
- D. The Mobility Master lacks MM-VA licenses; therefore, it shares partial configuration only.
Answer: B
NEW QUESTION 22
Refer to the exhibit.
Based on the output shown in the exhibit, which channel offers the highest quality?
- A. Channel 14
- B. Channel 11
- C. Channel 6
- D. Channel 1
Answer: C
NEW QUESTION 23
A network administrator is in charge of a Mobility Master (MM) - Mobility Controller (MC) based network security. Recently the Air Monitors detected a Rogue AP in the network and the administrator wants to enable "Tarpit" based wireless containment.
What profile must the administrator enable "tarpit" wireless containment on?
- A. IDS Unauthorized device profile
- B. IDS General profile
- C. IDS profile
- D. IDS DOS profile
Answer: A
NEW QUESTION 24
Refer to the exhibit.

An Aruba network is deployed with L2 and L3 Mobility Master (MM) redundancy across two datacenters, as shown in the exhibit. The network administrator confirms that all Mobility Controllers (MC) are currently communicating with MM1, which is the L2 Active and, L3 Primary.
Which MM IP will MCs communicate with if MM1 fails?
- A. 10.2.1.21
- B. 10.1.1.12
- C. 10.1.1.10
- D. 10.2.1.10
Answer: D
NEW QUESTION 25
Refer to the exhibit.
A network administrator has created AAA profile for the corporate VAP. In addition to the regular Radius based authentication, the administrator needs to be able to disconnect the users from either of the two servers that are part of the "Radius" server group.
What must the administrator do next in order to achieve this goal?
- A. Use the "Radius' server group as both the Accounting Server Group and the RFC 3576 server in the AAA profile.
- B. Use the "Radius" server group as the RADIUS Accounting Server Group in the AAA profile.
- C. Create two new RFC 3576 servers and assign them as the RFC 3576 servers in the AAA profile.
- D. Use the "Radius' server group as the RFC 3576 server in the AAA profile.
Answer: A
NEW QUESTION 26
Refer to the exhibit.
A network administrator is evaluating a deployment to validate that a user is assigned the proper role and reviews the output in the exhibit. How is the role assigned to user?
- A. The MC assigned the role based on Aruba VSAs.
- B. The MC assigned the default role based on the authentication method.
- C. The MC assigned the role based on server derivation rules.
- D. The MC assigned the machine authentication default user role.
Answer: B
NEW QUESTION 27
A network administrator is in charge of a Mobility Master (MM) - Mobility Controller (MC) based WLAN. The administrator has deployed an Airwave Management Platform (AMP) server in order to improve the monitoring capabilities and generate reports and alerts.
The administrator has configured SNMPv3 and Admin credentials on both the MMs and MCs and has created Groups and Folders in the AMP server.
What two additional steps must the administrator do in order to let Airwave monitor the network devices? (Choose two.)
- A. Map the AMP's IP address with a mgmt-config profile in the MM.
- B. Move "New" devices into a group and folder in Airwave.
- C. Manually add each MM. MC and Access Point in the AMP server.
- D. Manually add the Active MM and wait for automatic Discovery.
- E. Set the AMP's IP address and Org string as DHCP option 43.
Answer: A,D
NEW QUESTION 28
A network administrator assists with the migration of a WLAN from a third-party vendor to Aruba in different locations throughout the country. In order to manage the solution from a central point, the network administrator decides to deploy redundant Mobility Masters (MMs) in a datacenter that are reachable through the Internet.
Since not all locations own public IP addresses, the security team is not able to configure strict firewall polices at the datacenter without disrupting some MM to Mobility Controller (MC) communications. They are also concerned about exposing the MMs to unauthorized inbound connection attempts.
What should the network administrator do to ensure the solution is functional and secure?
- A. Block all ports to the MMs except UDP 500 and 4500.
- B. Deploy an MC at the datacenter as a VPN concentrator.
- C. Install a PEFV license, and configure firewall policies that protect the MM.
- D. Block all inbound connections, and instruct the MM to initiate the connection to the MCs.
Answer: A
NEW QUESTION 29
A network administrator has racked up a 7210 Mobility Controller (MC) that will be terminating 200+ Aps on a medium-size branch office. Next, the technician cabled the appliance with 4SPF+ Direct Attached Cables (DACs) distributed between two-member switching stack and powered it up.
What must the administrator do next in the MCs to assure maximum wired bandwidth utilization?
- A. Map the four physical ports to port channel 0.
- B. Configure the same MSTP region that the switches have.
- C. Make all ports trunk interfaces and permit data VLANs.
- D. Manually set 10Gbps speeds on all ports.
- E. Disable spanning tree and allocate unique VLANs to each port.
Answer: D
NEW QUESTION 30
Refer to the exhibit.
A network administrator wants to configure an 802.1x supplicant for a wireless network that includes the following:
* AES encryption
* EAP-MSCHAP v2-based user and machine authentication
* Validation of server certificate in Microsoft Windows 10
The network administrator creates a WLAN profile and selects the change connection settings option. Then the network administrator changes the security type to Microsoft: Protected EAP (PEAP), and enables user and machine authentication under Additional Settings.
What must the network administrator do next to accomplish the task?
- A. Enable user authentication under Settings
- B. Enable server certificate validation under Settings.
- C. Change the security type to Microsoft: Smart Card or other certificate.
- D. Change default RC4 encryption for AES.
Answer: C
NEW QUESTION 31
Refer to the exhibits.

A user reports slow connectivity to a network administrator when connecting to AP-Garden and suggests that there might be a problem with the WLAN. The user's device supports 802.11n in the 2.4 GHz band. The network administrator finds the user in the Mobility Master (MM) and reviews the output shown in the exhibit.
What can the network administrator conclude after analyzing the data?
- A. 2.4Ghz band is currently congested, therefore a NIC upgrade to 802.11ac or higher is recommended so the user can move to 5Ghz.
- B. 365s are low cost outdoor APs recommended for coverage design only. AP-Garden currently has more clients than recommended and is getting congested.
- C. User's SNR value over time is lower than recommended, therefore he should either get closer to the Access Point or increase the transmit power.
- D. Channel usage is high and though this device has high speed the overall client rate is low on AP-Garden. there could be a few clients monopolizing the airtime on both bands at low speeds.
Answer: B
NEW QUESTION 32
Refer to the exhibit.
A network administrator deploys a new Mobility Master (MM) - Mobility Controller (MC) network. To test the solution, the network administrator accesses the console of a pair of APs and statically provisions them. However, one of the APs does not propagate the configured SSIDs. The network administrator looks at the logs and sees the output shown in the exhibit.
Which actions must the network administrator take to solve the problem?
- A. Create another AP group in the MC's configuration, and re-provision one AP with a different group.
- B. Re-provision one of the APs with a different name, and add new entries with the proper group in the whitelist.
- C. Re-provision one of the APs with a different name or modify the name in the whitelist.
- D. Re-provision the AP with a different group, and modify the name of one AP in the whitelist.
Answer: C
NEW QUESTION 33
Refer to the exhibit:
A company acquires ten barcode scanners to run inventory tasks. These WiFi devices support WPA2-PSK security only. The network administrator deploys a WLAN named scanners using the configuration shown in the exhibit.
What must the network administrator do next to ensure that the scanner devices successfully connect to their SSID?
- A. Set internal as the MAC authentication server group.
- B. Enable L2 Authentication Fail Through.
- C. Add scanner MAC addresses in the internal database.
- D. Add scanner MAC addresses in user derivation rules.
Answer: C
NEW QUESTION 34
An organization has several RAPs at different locations that broadcast two SSIDs. The internet-only SSID is in bridge/always mode, and the corporate SSID is in split-tunneling/standard mode. The network administrator deploys 10 more RAPs in different locations.
Users can successfully connect to the corporate SSID that is propagated by a RAP at a remote location. However, they report that it takes too long to access public internet web sites.
What is one part of the configuration that should be checked by the network administrator to verify this RAP deployment?
- A. Assigned VLAN
- B. IP pool
- C. User roles policies
- D. Operating mode
Answer: C
NEW QUESTION 35
Users run Skype for Business on wireless clients with no WMM support over an Aruba Mobility Master (MM) - Mobility Controller (MC) based network. When traffic arrives at the wired network, it does not include either L2 or L3 markings.
Which configuration steps should the network administrator take to classify and mark voice and video traffic with UCC heuristics mode?
- A. Enable WMM in a VAP profile, and explicitly permit voice and video UDP ports in a firewall policy.
- B. Confirm OpenFlow is enabled in the user role and VAP profile. Then enable WMM in a SSID profile, and explicitly permit voice and video UDP ports in a firewall policy.
- C. Confirm MM is the Openflow controller of MCs and Openflow is enabled in VAP and firewall roles. Enable Skype4Business ALG in UCC profiles.
- D. Confirm the MC is the Openflow controller of the MMs and Openflow is enabled in VAP and firewall roles. Enable Skype4Business ALG in UCC profiles.
Answer: A
NEW QUESTION 36
......
HP HPE6-A79 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
Get New HPE6-A79 Certification Practice Test Questions Exam Dumps: https://actual4test.torrentvce.com/HPE6-A79-valid-vce-collection.html