[Jan 08, 2022] Get New 300-425 Certification – Valid Exam Dumps Questions
100% Passing Guarantee - Brilliant 300-425 Exam Questions PDF
NEW QUESTION 45
Two Cisco 5520 Wireless LAN Controllers are managing all access points throughout the network. The WLCs are in different locations to provide geographical redundancy. A mobility group has been configured on both WLCs and has a UP status on both controllers. The APs in location A are statically configured to use controller A as the primary and controller B as the secondary If the WLC in location A goes offline the APs successfully join the WLC m location B, but they do not fail over to their primary configured controller. Which configuration task fixes this issue?
- A. Enable AP fallback globally on the WLC.
- B. Change the AP Failover Priority to critical
- C. Configure the WLC in location A as primary using the CAPWAP AP Controller IP Address command on all the location A access points.
- D. Use DHCP Option 43 and specify WLC in location A as primary.
Answer: C
NEW QUESTION 46
A network engineer is working on a design for a wireless network that must support data, voice, and location services. To support these services, which access point placement must the engineer use?
- A. corner only
- B. perimeter only
- C. indoor and outdoor
- D. perimeter and corner
Answer: D
Explanation:
NEW QUESTION 47
Refer to the exhibit.
Which two statements about Cisco Prime Infrastructure are true? (Choose two.)
- A. It shows the map editor feature in Cisco Prime Infrastructure.
- B. It shows the planning mode feature in Cisco Prime Infrastructure.
- C. Planning mode requires a special license in Cisco Prime Infrastructure.
- D. Controllers must be synchronized with Cisco Prime Infrastructure for planning mode to work.
- E. It presents the recommended number of APs for the selected coverage area based on the selections made.
Answer: B,E
Explanation:
NEW QUESTION 48
Refer to the exhibit.
What is the main reason why the Wi-Fi design engineer took a different approach than installing the APs in the offices, even though that installation provides better coverage?
- A. power supply considerations
- B. antenna gain
- C. aesthetics
- D. transmit power considerations
Answer: D
Explanation:
Explanation
https://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob30dg/RFDesign.html#wp1000551
NEW QUESTION 49
A wireless engineer is utilizing the voice readiness tool in Cisco Prime for a customer that wants to deploy Cisco IP phones. Which dBm range is the network inspected against?
- A. −85 to −65 dBm
- B. −85 to −67 dBm
- C. −78 to −65 dBm
- D. −72 to −67 dBm
Answer: B
Explanation:
Section: Wireless Site Survey
NEW QUESTION 50
A wireless deployment in a high-density environment is being used by vendors to process credit card payment transactions via handheld mobile scanners. The scanners are having problems roaming between access points in the environment. Which feature on the wireless controller should have been incorporated in the design?
- A. 802.11w
- B. Application Visibility Control
- C. AP Heartbeat Timeout
- D. RX SOP
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/configguide/b_cg85/advanced_wireless_tuning.html
NEW QUESTION 51
A network engineer is preparing for an office site survey with a height of 2.5 meters. Which three components are recommended to complete the survey? (Choose three.)
- A. Use APs with built-in antennas.
- B. Use a drawing of the office space to draw AP and client placements.
- C. Use DoS attack on APs while measuring the throughput.
- D. Use APs with directional antennas.
- E. Use APs with external antennas.
- F. Use a battery pack to power APs
Answer: A,B,F
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/8-4/b_mesh_84/Site_Preparation_and_Plannin
NEW QUESTION 52
Which two criteria must be considered when conducting an outdoor bridge site survey? (Choose two.)
- A. Fresnel zone
- B. traffic lights
- C. near-far effect
- D. power lines
- E. weather
Answer: C,D
Explanation:
https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey-guidelines-wlan-00.html#anc7
NEW QUESTION 53
An engineer must ensure that the new wireless LAN deployment can support seamless roaming between access points using a standard based on an amendment to the 802.11 protocol. Which protocol must the engineer selects?
- A. 802.11i
- B. 802.11e
- C. 802.11r
- D. 802.11ac
Answer: C
Explanation:
NEW QUESTION 54
A technician connects a Cisco Aironet 3700 Series access point to a switch and realizes that the AP is coming up with 3x3 MIMO. Which reason explains this behavior?
- A. A redundant power supply is unavailable on the switch.
- B. The AP is getting power from a power injector.
- C. The switch is 802.3af capable.
- D. The switch is PoE+ capable.
Answer: C
Explanation:
NEW QUESTION 55
An engineer changed the TPC Power Threshold for wireless deployment from the default value to -65 dBm. The engineer conducts a new post-deployment Survey to validate the results What is the expected outcome?
- A. Increased received sensitivity
- B. Decreased client signal strength
- C. Decreased channel overlap
- D. Increase cell size
Answer: B
NEW QUESTION 56
What causes the most signal attenuation, based on the wireless design tools?
- A. metal door
- B. office window
- C. cinder block wall
- D. glass wall
Answer: A
Explanation:
NEW QUESTION 57
A wireless engineer must optimize RF performance for multiple buildings with multiple types of construction and user density. Which two actions must be taken? (Choose two.)
- A. Configure WMM profiles for each building.
- B. Configure RF profiles for each area type.
- C. Configure AP groups for each area type.
- D. Enable DTPC on the network.
- E. Configure Flexconnect groups for each building.
Answer: B,C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-10/config-guide/b_cg810/configuring_ap_groups.html
NEW QUESTION 58
A network engineer is preparing for an office site survey with a height of 2.5 meters. Which three components are recommended to complete the survey? (Choose three.)
- A. Use APs with built-in antennas.
- B. Use a drawing of the office space to draw AP and client placements.
- C. Use DoS attack on APs while measuring the throughput.
- D. Use APs with directional antennas.
- E. Use APs with external antennas.
- F. Use a battery pack to power APs
Answer: A,B,F
NEW QUESTION 59
An engineer performs a Layer 1 survey by using Metageek Chanatyzer only on the current operating channel. Which operating mode is configured for a Cisco CleanAir AP?
- A. SE-connect
- B. local
- C. sniffer
- D. monitor
Answer: B
Explanation:
https://www.metageek.com/training/lessons/chanalyzer-clean-air.html
NEW QUESTION 60
A wireless engineer is performing a post verification of a wireless network. Which two metrics does the engineer verify to ensure that the wireless network can support voice services? (Choose two.)
- A. The coverage area must have a noise floor that does not exceed -87 dBm.
- B. The client device must have at least an -65 dBm RSSI.
- C. The rate of retransmitted packets must be 20 percent or below.
- D. The client device must have at least an -67 dBm RSSI.
- E. The rate of retransmitted packets must be 15 percent or below.
Answer: C,D
Explanation:
NEW QUESTION 61
......
The Cisco 300-425 exam is designed to evaluate the applicants’ knowledge of wireless network design. This is one of the concentration tests that the candidates are required to complete along with the core exam for obtaining the CCNP Enterprise certification. Moreover, those individuals who achieve the passing score will be awarded the Cisco Certified Specialist – Enterprise Wireless Design certificate.
Free 300-425 braindumps download: https://actual4test.torrentvce.com/300-425-valid-vce-collection.html