Ace Network Appliance NS0-593 Certification with Actual Questions Nov 01, 2023 Updated
2023 The Most Effective NS0-593 with 60 Questions Answers
The NS0-593 certification exam is a great way for professionals to demonstrate their expertise in NetApp ONTAP storage systems. NetApp Certified Support Engineer ONTAP Specialist certification can help individuals stand out in a competitive job market and can lead to better job opportunities and higher salaries. Additionally, the NS0-593 certification is recognized by many employers as a valuable credential that demonstrates a candidate's knowledge and skills in supporting NetApp ONTAP storage systems.
NEW QUESTION # 17
A storage administrator reports that a monitoring toot is reporting that the storage controller reads between
90% to 93% CPU use. You run the sysstat -m command against thenode in question.
Referring to the exhibit, which statement is correct?
- A. The CPU Is not a first-order monitoring metric for ONTAP.
- B. The customer should be advised to exclude certain workflows to reduce use.
- C. High network exempt use could be a problem.
- D. You should immediately investigate further bygathering perfstat data and opening a support case.
Answer: D
NEW QUESTION # 18
When you review performance data for a NetApp ONTAP cluster node, there are back-to-back (B2B) type
consistency points (CPs) found occurring onthe loot aggregate.
In this scenario, how will performance of the client operations on the data aggregates be affected?
- A. During B2B processing, clients will be unable to write data.
- B. Data aggregates will not be affected by B2B processing on another aggregate.
- C. During B2B processing, clients will be unable to read data.
- D. During B2B processing, all I/O to the node is stopped.
Answer: B
NEW QUESTION # 19
You have a customer who is concerned with high CPU and disk utilization on their SnapMirror destination
system. They are worried about high CPU and disk usage without any user operations.
In this situation, what should you tell the customer?
- A. Suggest that the customer throttle their SnapMirror relationships to reduce resource consumption.
- B. Suggest that the customer manually cancel any scanners on the destination to reduce CPU usage.
- C. Explain that background tasks such as SnapMirror throttle up in the absence of user workload.
- D. Explain that only user workload should use the CPU and Investigate further.
Answer: B
NEW QUESTION # 20
Your customer is running a NetApp AFF A800 system with NetAppONTAP 9.8 software and states that their
NS224 shelf is not showing with the correct shelf ID. You analyze the data and the shelf shows an
identification of "1.SHFHUXXXXXXXXXX."
What is the cause of the reported Issue?
- A. The shelf has been power cycled.
- B. The shelf was cabled Incorrectly.
- C. A new shelf was added to the controller.
- D. The shelf had a disk replaced too quickly.
Answer: C
NEW QUESTION # 21
You have connection Issues from a Linux host to an AFF A400 FC LUN. You are asked by support to run the
NetApp sanlun command to provide troubleshooting information.
Which NetApp software package must be installed on the host?
- A. SnapDrive for UNIX
- B. Inventory Collect Tool
- C. Host Utilities package
- D. Virtual Storage Console
Answer: C
NEW QUESTION # 22
After expanding a two-node AFF A300 cluster with two AFF A700 nodes, you observe latencies when data is
accessed indirectly. The system node run -node -command netstat command shows retransmits and packet
drops on the LIFs. The AFF A700 nodes with 40 Gbps and the AFF A300 connect with 10 Gbps to the cluster
interconnect. You are using Cisco Nexus 3132Q cluster interconnect switches. You just updated to ONTAP
9.8 software.
In this scenario, what is causing this problem?
- A. There is an NXOS firmware mismatch, verify in the Interoperability Matrix (1MTJ for a supportedversion.
- B. The 10 Gbps to 10 Gbps cluster Interconnect is creating a speed mismatch.
- C. AFF A300 and AFF A700 node mixing Isnot supported in ONTAP 9.8 software.
- D. The AFF A300 Is using an adapter card for the cluster Interconnect, but only onboard ports are supported.
Answer: B
NEW QUESTION # 23
You receive the panic message shown in the exhibit.
In this scenario, which component should you troubleshoot first?
- A. the MetroCluster FC-Vl card in slot 6
- B. the memory module in slot 1
- C. the PCI card in slot 3
- D. the CPU
Answer: D
NEW QUESTION # 24
The motherboard of Node-01 is being replaced. To perform this task, a takeover was Initiated from Node-02.
Node-02 panics showing the string below.
PANIC; Permanent errors on all HA mailbox disks (while marshalling header) in SKprocess
fnmbx_instanceWorker on release 9.5P8 (C)
What has happened in this situation?
- A. While in maintenance mode, the sldiag device show command was executed.
- B. While in maintenance mode, the fcadmin device_map command was executed.
- C. While in maintenance mode, the HA_config show command was executed.
- D. While in maintenance mode, the mailbox destroy local command was executed.
Answer: B
NEW QUESTION # 25
You recently discovered the error message shown below in your ONTAP logs.
What should be your first action to correct this Issue?
- A. Use the storage takeover command on the storage controller that contains my_data_vol.
- B. Determine the root cause behind the inconsistency before attempting any recovery procedure.
- C. Use the wafliron command against my_data_vol to solve the inconsistency on the volume.
- D. Power cycle all the disk storage shelves that contain drives of the aggregate with the my_data_vol
volume.
Answer: D
NEW QUESTION # 26
A customer enabled NFSv4.0on an SVM and changed the client mount from NFSv3 to NFSv4. Afterwards,
the customer found that the directory owner was changed from root to nobody.
In this scenario, which statement is true?
- A. The ID mapping domains do not match between the client and server.
- B. The export policy is not configured properly.
- C. The customer did not configure name services on the SVM.
- D. The clients must be restarted to start using NFSv4.
Answer: B
NEW QUESTION # 27
Recently, a CIFS SVM was deployed and is working. The customer wants to use the Dynamic DNS(DDNS)
capability available in NetApp ONTAP to easily advertise both data UFs to their clients. Currently. DNS is
only responding with one data LIF. DDNS is enabled on the domain controllers.
Referring to the exhibit, which two actions should be performed to enable DDNS updates to work? (Choose
two.)
- A. Remove the NFS protocol from the cifs_01 data LIF.
- B. Enable the -is-enabledparameter for the SVM DDNS services
- C. Disable the -vserver-fqdn parameter for the SVM DDNS services.
- D. Enable the -use-secure parameter for the SVM DDNS services.
Answer: B,C
NEW QUESTION # 28
When an administrator tries to create a share for an existing volume named voll, the process fails with an error.
Referring to the exhibit, what Is the reason for the error?
- A. The CIFS service is not authenticating properly with the domain controller.
- B. The CIFS service is not in workgroup mode.
- C. The volume has not beenmounted.
- D. The volume must have a type of DP.
Answer: C
NEW QUESTION # 29
Your customer complains about missing volume snapshot copies on a SnapMlrror destination. While
investigating this case, you notice an executed SnapMirror resync operation in the event logs of the system.
In this scenario, what Is the cause of this problem?
- A. The autodelete option removed Snapshot copies before the resync.
- B. Newer Snapshot copies than the common snapshot that was chosen for resync were removed
automatically at the destination. - C. Snapshot copies were manually removed from the destination after the resync.
- D. NetApp ON TAP System Manager removed these snapshot copies due to a snapshot schedule.
Answer: C
NEW QUESTION # 30
You are trying to deploy a Connector in the AWScloud from NetApp Cloud Manager. The deployment fails
and shows the message 'Insufficient permissions to deploy Cloud Connector". You have verified the AWS
access key and the AWS secret key.
In this scenario, what Is the reason that the deployment failed?
- A. The required Identity and Access Management (IAM) policies were not Installed.
- B. The Connector can be deployed only inAWS GovCloud (US).
- C. The user lacks the permission to deploy within Cloud Manager.
- D. No AWS Marketplace subscription is associated with Cloud Manager.
Answer: C
NEW QUESTION # 31
Your customer mentions that they have accidentally destroyed both rootaggregates in their two-node cluster.
In this scenario, what are two actions that must be performed? (Choose two.)
- A. Re-create the cluster from the local backup.
- B. Re-create the cluster from the remote backup.
- C. Rejoin the second node to the re-created cluster.
- D. Install ONTAP from a USB device.
Answer: C,D
NEW QUESTION # 32
Your customer installed the shelf firmware for their NS224 shelf over a week ago, and the firmware has
notupgraded on shelf 1 module B. The customer wants to know what the next steps would be to get the
firmware upgraded after verifying that the shelf firmware is indeed loaded onto the system.
Which step would you perform to complete the firmware upgrade?
- A. Power cycle the shelf.
- B. Reseat the disk in Bay 0.
- C. Reseat the NSM100 module.
- D. Reseat the PSU of the shelf.
Answer: A
NEW QUESTION # 33 
Referring to the exhibit, what do you need to do to return the MetroCluster to a normal state?
- A. Enter the storage failover giveback command on Site B.
- B. Enter the metroclustor switchback command on Site B.
- C. Enter the metrocluster switchback command on Site A.
- D. Enter the storage failover giveback command on Site A.
Answer: C
NEW QUESTION # 34
You ate connecting a Windows Server 2019 hostto ISCSI LUNs on a 4-node AFF A250 cluster running
NetApp ONIAP 9.8 software. The host is unable to connect to the target interface, and the ONTAP event log
has the message shown below.
ISCSI: network interface identifier disabled for use; incoming connection discarded
In this scenario, what is the cause of this connection issue?
- A. iSNS is not enabled on the storage virtual machine.
- B. The WWPN was not added to the initiator group.
- C. CHAP isnot configured correctly for the specified initiator.
- D. The iSCSI service is not enabled on the interface.
Answer: B
NEW QUESTION # 35
A customer reports that some of their client computers are unable to access a FlexGroup over CIFS. This
problem involves only their older Windows XP clients and some printers and scanners.
In this scenario, which statement Is correct?
- A. These systems use the SMQI protocol which Is an unsupported feature in FlexGroup
- B. These systems use Offloaded Data Transfer, which is an unsupported feature in FlexGroup.
- C. FlexGroup requires CIFS shares to use the Continuously Available Feature, which these clients do not
support. - D. FlexGroup requires CIFS shares to be located in qtrees, which these clients do not support.
Answer: C
NEW QUESTION # 36
You Just used the CLI to create a NetApp ONTAP FlexGroup Volume on a NetApp Cloud Volumes ONTAP
instance. After creation, you notice odd behavior in NetApp Cloud Manager.
In this scenario,what Is the reason for this behavior?
- A. The Capacity Management Mode within Cloud Manager should be set to Manual.
- B. Cloud Volumes ONTAP does not support FlexGroup volumes.
- C. The Capacity Management Mode within Cloud Manager should be set to Automatic.
- D. Cloud Manager must be used to provision the FlexGroup volume.
Answer: D
NEW QUESTION # 37
Which two throughput elements are controlled by host applications? (Choose two.)
- A. latency
- B. concurrency
- C. Jitter
- D. operation size
Answer: A,C
NEW QUESTION # 38
......
The NS0-593 certification exam is a challenging exam that requires candidates to demonstrate their knowledge and skills in a variety of areas. To pass the exam, candidates must score a minimum of 70% on the exam. However, NetApp recommends that candidates aim for a higher score to demonstrate their mastery of the subject matter.
Try Free and Start Using Realistic Verified NS0-593 Dumps Instantly.: https://actual4test.torrentvce.com/NS0-593-valid-vce-collection.html