[2023] Pass VMware 5V0-41.21 Exam in First Attempt Easily
The Most Efficient 5V0-41.21 Pdf Dumps For Assured Success
VMware 5V0-41.21 Certification Exam is intended for IT professionals who have experience in configuring and implementing software-defined networking solutions in a VMware NSX-T Data Center 3.1 environment. VMware NSX-T is the leading software-defined networking and security platform that enables organizations to deploy secure and scalable network infrastructures on-demand. By passing the 5V0-41.21 exam, candidates can showcase their expertise in VMware NSX-T and demonstrate their ability to deploy and manage secure network solutions.
NEW QUESTION # 29
Which of the following describes the main concept of Zero-Trust Networks for network connected devices?
- A. Network connected devices should only be trusted if they are within the organizational boundary.
- B. Network connected devices should only be trusted if their identity and integrity can be verified continually.
- C. Network connected devices should only be trusted if the user can be successfully authenticated.
- D. Network connected devices should only be trusted if they are issued by the organization.
Answer: C
NEW QUESTION # 30
Which two criteria would an administrator use to filter firewall connection logs on NSX?
- A. FIREWALL RULE TAG
- B. FIREWALL SYSTEM
- C. FIREWALL-PKTLOG
- D. FIREWALL CONNECTION
- E. FIREWALL MONITORING
Answer: B,D
NEW QUESTION # 31
Refer to the exhibit.
An administrator configured a firewall rule on their Edge Gateway to allow access to web servers.
What is missing in the Gateway Firewall policy to have the firewall rule applied?
- A. Firewall service needs to be enabled on gateway.
- B. Firewall rule needs to be moved to Default category.
- C. Firewall rule needs to be enabled.
- D. Firewall rule needs to be published
Answer: B
NEW QUESTION # 32
To which object can time based rules be applied?
- A. DFW or Gateway Firewall, but not both at the same time
- B. DFW and Gateway Firewall both
- C. Gateway Firewall only
- D. DFW only
Answer: B
NEW QUESTION # 33
A security administrator recently enabled Guest Introspection on NSX-T Data Center.
Which would be a reason none of the Microsoft Windows based VMs are reporting any information?
- A. VMware Tools need to be reconfigured.
- B. Windows VMs require a reboot.
- C. NSX Manager require a reboot.
- D. NSX Manager needs to be reconfigured.
Answer: D
Explanation:
NSX Manager needs to be reconfigured. Guest Introspection requires additional configuration of the NSX Manager in order to collect information from the Windows based VMs. This configuration includes setting up the Guest Introspection service with the appropriate credentials and configuring the rules to allow the traffic through the firewall. Once this is done, the Windows VMs will start reporting information to the NSX Manager.
For more information on setting up Guest Introspection, please refer to the NSX-T Data Center documentation: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsx-t-3.0-installing/GUID-3B7F12AD-D8F7-44B9-A56B-E71F64C2F6A0.html
NEW QUESTION # 34
Refer to the exhibit.
An administrator needs to configure a security policy with a firewall rule allowing a group of applications to retrieve the correct time from an NTP server. Which is the category to configure this security policy and firewall rule?
- A. Application
- B. Infrastructure
- C. Emergency
- D. Environment
Answer: B
Explanation:
For further reading, see the VMware NSX-T Data Center Administration Guide (https://pubs.vmware.com/NSX-T-Data-Center/index.html#com.vmware.nsxt.admin.doc/GUID-D12A8AE7-B9E9-4C79-8FE4-7F4BECD4F71B.html) for more information on configuring firewall rules.
NEW QUESTION # 35
Refer to the exhibit.
A security administrator is configuring a time window to create a time-based distributed firewall rule. While configuring the time window, an error displayed as shown in the exhibit. Which action will resolve the problem?
- A. Configure the ESXl host to use a remote NTP server.
- B. Change the time windows frequency
- C. Change the time window interval.
- D. Restart me NTP service on the ESXl host.
Answer: A
Explanation:
The most likely action to resolve the problem is to configure the ESXi host to use a remote NTP server. The time window requires the ESXi host to be synchronized to a time source in order to properly calculate the time window, and the error is likely due to the ESXi host not being synchronized. Configuring the ESXi host to use a remote NTP server should ensure that the host is properly synchronized, and allow the time window to be configured correctly. Reference: [1] https://docs.vmware.com/en/VMware-NSX-T/3.0/vmware-nsx-t-30-administration-guide/GUID-DD7F38A3-3D3B-47F1-92D7-9A4D4F3C44E1.html [2] https://www.vmware.com/support/vsphere/doc/vsphere-esxi-vcenter-server-601-configuration-maximums.html
NEW QUESTION # 36
Which two Guest OS drivers are required for the Identity Firewall to operate? (Choose two.)
- A. NSX File Introspection
- B. Guest Introspection
- C. vmxnet3
- D. e1000e
- E. NSX Network Introspection
Answer: B,E
Explanation:
The two Guest OS drivers that are required for the Identity Firewall to operate are NSX Network Introspection and Guest Introspection. NSX Network Introspection provides network-level visibility and control, while Guest Introspection provides kernel-level visibility and control. The other drivers listed, vmxnet3, NSX File Introspection, and e1000e, are not required for the Identity Firewall to operate.
NEW QUESTION # 37
Which esxcli command lists the firewall configuration on ESXi hosts?
- A. esxcli network firewall ruleset list
- B. vsipioct1 getrules -filter <filter-name>
- C. esxcli network firewall rules
- D. vsipioct1 getrules -f <filter-name>
Answer: A
Explanation:
This command allows you to display the current firewall ruleset configuration on an ESXi host. It will show the ruleset names, whether they are enabled or disabled, and the services and ports that the ruleset applies to.
For example, you can use the command "esxcli network firewall ruleset list" to list all the firewall rulesets on the host.
You can also use the command "esxcli network firewall ruleset rule list -r <ruleset_name>" to display detailed information of the specific ruleset, where <ruleset_name> is the name of the ruleset you want to display.
It's important to note that you need to have access to the ESXi host's command-line interface (CLI) and have appropriate permissions to run this command.
https://docs.vmware.com/en/VMware-vSphere/6.7/com.vmware.vcli.ref.doc/esxcli_network_firewall_ruleset.html
NEW QUESTION # 38
Which two statements are true about IDS/IPS signatures? (Choose two.)
- A. Users can upload their own IDS signature definitions from the NSX UI.
- B. An IDS signature contains a set of instructions that determine which traffic is analyzed.
- C. An IDS signature contains data used to identify known exploits and vulnerabilities.
- D. IDS Signatures can be High Risk, Suspicious, Low Risk and Trustworthy.
- E. Users can create their own IDS signature definitions from the NSX UI.
Answer: B,C
Explanation:
(https://pubs.vmware.com/NSX-T-Data-Center/index.html#com.vmware.nsxt.admin.doc/GUID-AFAF58DB-E661-4A7D-A8C9-70A3F3A3A3D3.html)
NEW QUESTION # 39
In a brownfield environment with NSX-T Data Center deployed and configured, acustomer is interested in Endpoint Protection integrations. What recommendation should be provided to the customer when it comes to their existing virtual machines?
- A. A minimum installation of VMware tools is required.
- B. A custom install of VMware tools is required to select the drivers.
- C. Virtual machine hardware should be version 10 or higher.
- D. Virtual machine must be protected by vSphere HA.
Answer: C
NEW QUESTION # 40
What is the NSX feature that allows a user to block ICMP between 192.168.1.100 and 192.168.1.101?
- A. NSX Distributed Switch Agent
- B. NSX Distributed Firewall
- C. NSX Distributed IDS/IPS
- D. NSX Distributed Routing
Answer: B
Explanation:
NSX Distributed Firewall is used to create firewall rules to control traffic between networks.
For further reading, see the VMware NSX-T Data Center Administration Guide (https://pubs.vmware.com/NSX-T-Data-Center/index.html#com.vmware.nsxt.admin.doc/GUID-4B6A4A87-F9C7-4AAB-923F-C6B84C33AF7D.html) for more information on configuring firewall rules.
NEW QUESTION # 41
An administrator needs to configure their NSX-T logging to audit changes on firewall security policy. The administrator Is using the following command from NSX-T3.1 documentation :
Which Message ID from the following list will allow the administrator to track changes on firewall security rules?
- A. MONITOR
- B. FABRIC
- C. SYSTEM
- D. FIREWALL
Answer: A
NEW QUESTION # 42
Reference the CLI output.
What is the source IP address in the distributed firewall rule to accept HTTP traffic?
- A. 172.16.10.12
- B. 172.16.20.11
- C. 172.16.10.11
- D. 172.16.30.11
Answer: C
NEW QUESTION # 43
An NSX administrator is trying to find the dvfilter name of the sa-web-01 virtual machine to capture the sa-web-01 VM traffic. What could be a reason the sa-web-01 VM dvfilter name is missing from the command output?
- A. sa-web-01 is powered Off on ESXi host.
- B. ESXi host has 5SH disabled.
- C. sa-web-01 VM has the no firewall rules configured.
- D. ESXi host has the firewall turned off.
Answer: A
Explanation:
The most likely reason the sa-web-01 VM dvfilter name is missing from the command output is that the sa-web-01 VM is powered off on the ESXi host. The dvfilter name is associated with the VM when it is powered on, and is removed when the VM is powered off. Therefore, if the VM is powered off, then the dvfilter name will not be visible in the command output. Other possible reasons could be that the ESXi host has the firewall turned off, the ESXi host has 5SH disabled, or that the sa-web-01 VM has no firewall rules configured. Reference: [1] https://kb.vmware.com/s/article/2143718 [2] https://docs.vmware.com/en/VMware-NSX-T/3.0/vmware-nsx-t-30-administration-guide/GUID-AC3CC8A3-B2DE-4A53-8F09-B8EEE3E3C7D1.html
NEW QUESTION # 44
Which of the following are the local user accounts used to administer NSX-T Data Center?
- A. operator, admin, root
- B. operator, admin, audit
- C. admin, super, read-only
- D. admin, audit, root
Answer: B
Explanation:
For further reading, see the VMware NSX-T Data Center Administration Guide (https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.1/com.vmware.nsxt.admin.doc/GUID-4A4E9FBE-50B3-4F8F-B6C4-8527E7A08A67.html) for more information on user accounts and permissions in NSX-T Data Center.
NEW QUESTION # 45
Which two are requirements for URL Analysis? (Choose two.)
- A. A layer 7 gateway firewall rule must be configured on the tier-1 gateway uplink to capture DNS traffic,
- B. The NSX Manager requires access to the Internet to download category and reputation definitions.
- C. The ESXi hosts require access to the Internet to download category and reputation definitions.
- D. The NSX Edge nodes require access to the Internet to download category and reputation definitions.
- E. A layer 7 gateway firewall rule must be configured on the tier-0 gateway uplink to capture DNS traffic.
Answer: A,E
NEW QUESTION # 46
Refer to the exhibit.
An administrator configured a firewall rule on their Edge Gateway to allow access to web servers.
What is missing in the Gateway Firewall policy to have the firewall rule applied?
- A. Firewall service needs to be enabled on gateway.
- B. Firewall rule needs to be moved to Default category.
- C. Firewall rule needs to be enabled.
- D. Firewall rule needs to be published
Answer: B
NEW QUESTION # 47
......
We offers you the latest free online 5V0-41.21 dumps to practice: https://actual4test.torrentvce.com/5V0-41.21-valid-vce-collection.html