When you decide to buy our 070-513 valid torrent, make sure you have read the buyer guidelines of about our products. The buyer guidelines will give you a full understanding of 070-513 exam training material before you buy it.

Our customer service for 070-513 exam pdf vce:

We provide 24/7 full time online service for 070-513 training vce. If you have any problem you encounter about 070-513 exam torrent, you can contact our service support. In addition, we also offer one-year free update service for 070-513 exam torrent after your successful payment.

How to purchase our 070-513 exam dumps:

Open our product site page of 070-513 pdf torrent choose the right dump version (we provide three versions of each dump on our site: the PDF, online version and software version) of Microsoft 070-513 practice pdf that you want to buy and add it to your shopping cart.

Register your account on our product site of 070-513 training vce; please fill in your frequently used email id (For receiving our 070-513 exam dumps later).

Upon successful payment, our systems will automatically send an email attached with the 070-513 : TS: Windows Communication Foundation velopment with Microsoft .NET Framework 4 training vce. (If you do not receive the 070-513 practice dumps within 12 hours, please contact us. Note: don't forget to check your spam box.)

Some notes you need to pay attention:

Make sure you choose the right version of MCTS 070-513 study material. Be sure that you have entered the right email id and remember your account information including password or else before your payment of our 070-513 exam torrent.

Pay attention to your order information of the 070-513 exam torrent you have purchased.

Check your mailbox more or time to know if there is some update of 070-513 sending to your mailbox.

The brief introduction of 070-513 test torrent:

As IT exam candidates, to pass IT exam and get IT certification is so important that most of them try best to pass the related IT exam, especially the exam of 070-513 actual test. The 070-513 requires the candidates obtain the basic IT skills and more professional capability. So you should pay attention to the exam introduction of 070-513 exam training torrent.

The guarantee of 070-513 exam torrent:

Although all questions and answers of our 070-513 training vce is developed by our IT elite with ten-year IT experience, so that our 070-513 test dumps have more than 98% hit rate. For your candidates' benefits, we make a promise that if you fail, we will give you a full refund of the cost you purchased to reduce your loss.

Instant Download 070-513 Exam Braindumps: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Microsoft TS: Windows Communication Foundation velopment with Microsoft .NET Framework 4 Sample Questions:

1. A Windows Communication Foundation (WCF) service implements the following contract. (Line numbers are included for reference only.)
01 <ServiceContract()>
02 Public Interface IDataAccessService
03
04 <OperationContract()>
05 Sub PutMessage(ByVal message As String)
06
07 <OperationContract()>
08 <FaultContract(GetType(TimeoutFaultException))>
09 <FaultContract(GetType(FaultException))>
10 Function SearchMessages(ByVal search As String) As String ()
11
12 End Interface
The implementation of the SearchMessages method throws TimeoutFaultException exceptions for database timeouts. The implementation of the SearchMessages method also throws an Exception for any other issue it encounters while processing the request. These exceptions are received on the client side as generic FaultException exceptions.
You need to implement the error handling code for SearchMessages and create a new channel on the client only if the channel faults.
What should you do?

A) Catch both TimeoutFaultException and FaultException. Create a new channel in both cases.
B) Catch and handle TimeoutFaultException. Catch FaultException and create a new channel.
C) Catch and handle FaultException. Catch TimeoutFaultException and create a new channel.
D) Catch and handle both TimeoutFaultException and FaultException.

2. The following is an example of a SOAP envelope.
<s:Enelope xmlns:se'http://schemas.xmlsoporg/soap/envelopef'>
<s: Header> <h:Storeld xmlns:he"http:/!www.contoso.com"s
<Ih: Storeld>
</s:Header>
<s:Body>
<CheckStockRequest xmlnsehttp://wwwcorIosocom">
<ltemld>2469 <Iltenld>4
</CheckStoc kRequest>
<Is: Body>
<Is: Envelope>
You need to create a message contract that generates the SOAP envelope.
1 which code segment should you use?

A) [MessageContract(WrapperName="http:I/www. contoso. comn")]
public class CheckStockRequest {
[MessageHeader(Nanez"http:llwww.contoso.com")] public mnt Storeld{get; set.}
[MessageBodyMember(Namee'intp://www..contoso.com")] public nit itemld{get set;)
}
B) [MessageContract(WrapperNamespace="http://www. contosocom")] pi+-lic class
CheckStockRequest
{
[MessageHeader(Na-mespacesttp://wwwcontoso. comn")]
public mnt Storeld{get set.}
public mnt ltemld{get: set;}
)
C) (MessageContract(WrapperNamespace="httpJ/www. contoso.com")] public class
CheckStockRequest
{
[MessageHeader(Namespace11tp:IIwww. contoso. comn")]
public int Storeld{get set;}
(MessageBodyMember]
public int ltemmld(get set}
}
D) [MessageContract(WrapperNamespace="http:I/www.contoso.comn")] public class
CheckStoc kRequest
{
[MessageHeader(Namespaces"http:I/www.contosocom")]o
public nmt Storeld{get; set;)
[MessageBodyMember(Namespaces"http://www. contoso . comn")]
public nmt ltemld{get; set;}
}

3. You are developing a Windows Communication Foundation (WCF) service that executes a long-running operation.
The service is accessed from your business applications in a server transaction in which the client does not participate.
You need to ensure that the transaction times out and aborts if the operation has not completed within 45 seconds.
What should you do?

A) Apply OerviceBehavior (TransactlonTiitieout: = "00:00:45")> to the service
implementation.
B) Apply <OperationBehavior (TransactionScopeRequired:=False) > to the service operation.
C) Set the service binding receiveTimeout attribute to 00:00:45.
D) Set the service binding sendTimeout attribute to 00:00:45.

4. You develop a Windows Communication Foundation (WCF) service that uses basic authentication for client credentials. This service is currently configured to use message security.
The service is hosted on a server in workgroup mode.
Users report that their passwords are stolen when they use public computers.
You need to ensure that messages are secure and users are authenticated.
You prevent the service from being called over HTTP through Microsoft Internet Information Services (IIS) configuration. What should you do next?

A) Use the transportWithMessageCredential security mode and specify Basic for the transport client credential type.
B) Use the message security mode and specify Basic for the transport client credential type.
C) Use the transport security mode and specify None for transport client credential type.
D) Use the transportWithMessageCredential security mode and specify None for the transport client credential type.

5. A class named TestService implements the following interface.

TestService is hosted in an ASP.NET applicator.
You need to modify the application to allow the GetServiceTime method to return the data formatted as JSON.
It must do this only when the request URL ends in lServiceTime.
What should you do?

A) Add this attribute to the GetServiceTime method
<webGet(
ResponseFormat WebMessageFormatJson,
UnTemplate:eJServiceTime")>?
Create a new svc file named Jsonversion svc with the following contract <%@ ServiceHost
Servicee"TessService"i
Factory="System ServiceModelktivation WebServiceHosFactory" %s
B) Add this attribute to the GetServiceTime method
<WebGet(UriTempbte: z"{Json}/ServiceTime")>
Create a new svc file named Jsonversionsvc with the following contert <%@ ServiceHost
Service="TestSenvice"
Factoryz'System Se viceMode[ktivationWebServiceHodFactory" %>
C) Add this attribute to the GetServiceTime method
<Webinvoke(Method PGETw,
UrTemplate:eiSeneiceTim&, ResponseFormat: WebMessageFormatJson)>
In the bconfIg file, configure TestService in the system.arviceModeI/services collection as
follows. <senvice
namee"TestService"> <endpoint ad&esse"ISer,iceTime"r
contracte"TestSence' bindingewebHttpBindngw />
c/service>
D) Add this attribute to the GetServiceTime method <webinvoke(Method "POST)> In the bconfig file, add this element to systemserviceModeI/behaviors/endpointBehaviors. <behavior names"Json">e <enableWebScript
c/behavior>
In the web.config file, configure TestService in the system.serviceModel/services collection
as follows.
<service name"TestService">s
<endpoint address/ServiceTime"
contract-"TestSerAce""
behaviorConlfgurationz'Json
bindinge"webHttpBinding"!> <!services

Solutions: